If you’re searching “how much does a bundle of roof shingles weigh?”, you’re probably not just curious, you’re planning something.
Maybe you’re:
- Picking up shingles yourself and wondering if your truck (or back) can handle it
- A builder calculating material loads
- A homeowner questioning whether your roof structure can support new shingles
- Or trying to understand why roofing estimates mention thousands of pounds of material
After more than 20 years of roofing homes in Regina, we’ve lifted, loaded, and installed thousands of shingle bundles. So when people ask this question, we know it’s a smart one, because shingle weight affects safety, structure, cost, and installation quality.
Here’s what our real-world experience at Everflow Roofing can tell you.
The Short Answer: How Much Does a Bundle of Roof Shingles Weigh?
For the most common residential roofing material, 3-tab asphalt shingles, you can expect:
- Average weight: 50–80 lb per bundle (22–36 kg)
- Most common in Regina: ~60–70 lb per bundle
That’s per bundle. Once you zoom out to an entire roof, the numbers add up fast.
Why 3-Tab Shingles Are the Standard in Regina
If you’ve seen a new home going up or a straightforward roof replacement in Regina, chances are it’s topped with 3-tab shingles.
These shingles:
- Are made from a single, flat layer
- Have three uniform tabs for a clean, consistent look
- Weigh less than architectural or laminate shingles
That lighter weight makes them the go-to choice for new construction and practical homeowners.
Why We Use Them So Often at Everflow
- Reduced structural load
Less weight means less stress on roof trusses and framing. This is especially important when considering other environmental factors, like how much snow a roof holds in winter. - Clean, timeless appearance
Works well with most home styles. - Cost-effective
Excellent coverage without paying for heavier, multi-layer products.
Roofing 101: What Is a “Square”?
To understand total roof weight, you need to know how roofing is measured. Major manufacturers like IKO generally package their products based on this specific coverage metric:
- 1 square = 100 square feet of roof area
- 3 bundles of 3-tab shingles = 1 square
This measurement is key when calculating material weight, delivery logistics, and roof loading.
Let’s Do the Math: What a Roof Actually Weighs
Take a typical Regina bungalow with a 1,500 sq ft roof:
Step 1: Calculate bundles
15 squares × 3 bundles per square = 45 bundles
Step 2: Calculate total weight
45 bundles × ~70 lb per bundle = 3,150 lb
That’s over 1.5 tons of shingles going onto your roof. And that’s with the lighter option.
Why Shingle Weight Matters During Installation
This isn’t just trivia; weight directly affects how a roof is installed safely and correctly.
1. Worker Safety
Carrying 60–70 lb bundles up ladders takes experience, balance, and proper technique. Professional crews use conveyor trucks or hoists whenever possible to minimize physical strain and risk.
2. Roof Loading
You can’t just stack all the shingles in one spot.
- Weight must be evenly distributed across the ridge.
- Poor loading can stress trusses or cause damage before installation even begins.
This is one of the big differences between professional roofing crews and DIY attempts.
Final Answer: How Much Does a Bundle of Roof Shingles Weigh?
For standard 3-tab shingles, expect:
- 60–70 pounds per bundle
- Thousands of pounds across a full roof
It’s a manageable weight when handled correctly.
Thinking About a Roofing Project?
If you’re planning a new build or roof replacement and want a practical, cost-effective roofing system installed by a crew that understands the material inside and out, Everflow Roofing is here to help.
Ready to start the conversation? Contact us today for a free estimate. We’ll make sure your roof and everything underneath it is built to handle the load.
